BILLET CHOKE PUSH BUTTON, REPLACES STOCK ATTACHMENT FOR CLUTCH CABLE. SLIDES ON AND IS SECURED WITH A STAINLESS SET SCREW.

****DUE TO SIZE, IF YOU ONLY ORDER THIS ITEM YOUR SHIPPING CHARGES MAY COME UP HIGH DUE TO UPS FIGURES. ON ITEMS SMALL LIKE THIS WE USE USPS, IF THERE IS A SHIPPING OVERAGE CHARGE WE WILL REFUND THE DIFFERENCE

BILLET COVER PLATE FOR THE SHIFT INDICATOR. DUE TO THE HEAT AND THE MATERIAL USED FOR THE AFTERMARKET SHIFT INDICATOR, THE MATERIAL TENDS TO BUCKLE OVER TIME. USING THIS BILLET COVER PLATE REINFORCES THE CONTACT AREA AND IS PROVIDED WITH 3 STAINLESS ALLEN BOLTS TO SECURE.
*BILLET PLATE AND 3 BOLTS INCLUDED.

****DUE TO SIZE, IF YOU ONLY ORDER THIS ITEM YOUR SHIPPING CHARGES MAY COME UP HIGH DUE TO UPS FIGURES. ON ITEMS SMALL LIKE THIS WE USE USPS, IF THERE IS A SHIPPING OVERAGE CHARGE WE WILL REFUND THE DIFFERENCE

BLACK ANODIZED BILLET OIL FILL CAP, 7/8' HEX TOP. COARSE THREAD ONLY FOR EARLIER MODEL FJ1200 COVERS. COMES WITH O-RING

SET OF ALUMINUM MOTOR MOUNT SPACERS FOR THE LEFT SIDE ENGINE MOUNT.


MEASUREMENTS: 1.5" LONG, 1.095 O.D., 1/2" I.D.

K&N Oil Filter, multiple applications. Replacement for stock OEM FJ1100/1200 XJR 1200/1250

RECOMMENDED FOR MT-09 & FZ-09 ENGINES

DYNO PROVEN, BATTLE TESTED AND RRC APPROVED TO PROTECT AGAINST EXCESSIVE WEAR AND HEAT WHILE MAXIMIZING HORSEPOWER!

QUART OF SCHAEFFER'S 5W30 FULL SYNTHETIC OIL, BATTLE TESTED AND RRC APPROVED TO PROTECT AGAINST EXCESSIVE WEAR AND HEAT. WITH THE HIGH ZINC CONTENT AND RESISTANCE TO THERMAL BREAKDOWN THIS IS A SUPERIOR OIL FOR THE COST.

RRC Logo Front and Back, Yooper Shirts, Unisex, 60/40 Blend, Comfortable Lightweight Shirts, 3 Colors to choose from Black, Royal Blue, Navy

CRANKCASE BREATHER, WASHABLE
FLANGE ID .5"
OUTER DIAMETER 2"
FILTER HEIGHT 1.5"

RRC BILLET HEAT SHIELD BRACKET FOR INTAKE MANIFOLD
FJ1100/1200 XJR1200/1250

REPLACES THE STOCK OEM BRACKET THAT IS NO LONGER IN PRODUCTION OR AVAILABLE

SOLD INDIVIDUALLY

SAME MOUNTING AND POSITIONING AS OEM, UTILIZES 1/4-20 THREADS IN PLACE OF THE STOCK RUBBER GROMMETS FOR MOUNTING THE STOCK OR AFTERMARKET HEAT SHIELD.

INEX APPROVED

*Sold Individually, order 2 for a Set

Made in the USA.

Filter material: 100% monofilament polyester with water repellent finish standard on all pre-filters. Closed top, oval straight pre-filter

• Breathable mesh cover wraps around your air filter for additional protection.
• Deflects dirt and harmful debris that would otherwise clog or damage your air filter.
• Hydrophobic technology repels water in wet and rainy conditions (water repellent).
• Used to maximize performance and extend air filter life.
• Straps at the base of the pre-filter for easy do-it-yourself installation.

Measurements: 3.875"W x 6.125"L, 3"H

Made exclusively for RRC, replacing the the stock Main Seal ours is constructed to withstand the heat and is a Double Lip Construction to keep debris out while running with the ignition cover off. This seal will stop all your leaks you experience with the stock main seal.

Replaces Yamaha 36Y-15389-09-00

RRC DESIGNED FOR SETTING THE AIR GAP BETWEEN THE ROTOR BUTTON AND THE TRIGGERS. QUICK AND EASY BILLET DESIGN, SLIDES OVER THE ROTOR BUTTON, SET YOUR TIMING, TIGHTEN DOWN THE BACKING PLATE AND REMOVE THE TOOL.  WATCH OUR VIDEO ON SETTING YOUR TIMING AND UTLIZING THE RRC AIR GAP TOOL.

REPLACEMENT THROTTLE CABLE FOR YAMAHA FZ-09 AND 1200/1250 ENGINES

EXHAUST GASKET SET OF 8. OUR GASKETS SNAP IN AND HOLD IN PLACE. FITS Yamaha FJ1100-1200, XJ1200 and XJR1300

RRC BILLET -6AN FUEL TEE EASILY REPLACE THE STOCK FUEL INLET FOR A FAST, SAFE AND SECURE CONNECTION. NO MORE UNSIGHTLY HOSE CLAMPS. MEASURES JUST OVER 2" IN OVERALL LENGTH FOR EASY CONNECTIVITY WITH ANY -6 AN FITTING. INEX APPROVED FOR RRC, QUICK AND EASY SELF INSTALLATION. COMES WITH 4 O-RINGS

Brand New OEM Yamaha Heat Shield
FJ1100
FJ1200
XJR1200
XJR1300

SET OF 4 PLUG WIRES AS SHOWN WITH 45 DEGREE BOOTS.

CUSTOM MADE SET OF 4 PLUG WIRES AS SHOWN WITH 45 DEGREE BOOTS. THESE WIRES ARE MADE TO FIT EXACTLY LIKE SHOWN IN THE PICTURE...TO WORK WITH RRC HEAT SHIELD (OR REPLICAS) WITH COILS MOUNTED FACING EACH OTHER.

*PERFECT FIT FOR RRC TOP END FAN CLEARENCE

Replaces stock shift shaft boss. This is designed to strengthen and support the boss area with extended threads and the one piece backing plate. A must for Road Racing!

1 GALLON OF SCHAEFFER'S 15W40 SUPREME 7000 SYNTHETIC RACING OIL. BATTLE TESTED AND RRC APPROVED TO PROTECT AGAINST EXCESSIVE WEAR AND HEAT. WITH THE HIGH ZINC CONTENT AND RESISTANCE TO THERMAL BREAKDOWN THIS IS A SUPERIOR OIL FOR THE COST.

REPLACEMENT SCOOP FOR THE SALDANA & FLUIDYNE LEGENDS ASPHALT OIL COOLER

The NEW RU-3510 is the replacement for the Chrome Backed filter which is no longer produced.

K&N Universal Clamp-On Air Filter: High Performance, Premium, Washable, Replacement Filter: Flange Diameter: 2.125 In, Filter Height: 3 In, Flange Length: 0.375 In, Type: Oval, RU-3510

ORIGINAL RRC PRODUCT, BLACK POWDER COAT ALUMINUM HEAT SHIELD. SLOTTED HOLES ON TOP FOR COIL MOUNTING, DEFLECTORS TO DIRECT COOL AIR AROUND THE CYLINDER HEAD. INSTALLS IN SECONDS.

Shift Indicator Engine Pigtail, for Yamaha FJ/XJR 1200/1250, complete with aluminum cover plate, O-Ring, and stainless bolts. This will work with the USLC Digital Dash Gauge for the 1200/1250 as well.

***If Shipping charges are incorrect we will refund the difference

Shift Indicator Dash Gauge ONLY, RED LED display1-5 gears and "N" for Neutral Fits Yamaha FJ/XJR 1200/1250. This will work with the USLC Engine Pigtail, as well as our RRC Engine Pigtail. For Complete Kit see other Item Listed

***If Shipping charges are incorrect we will refund the difference

WORKS WITH BOTH 1200/1250 AND FZ/MT-09

RRC CRANKCASE BREATHER TANK ALL ALUMINUM CONSTRUCTION INCLUDES FILTER, BOTTOM PETCOCK DRAIN, MALE -8AN. THIS TANK IS TO BE USED OFF THE STOCK CRANKCASE BREATHER LOCATION TO THE EXPANSION TANK. DO NOT RUN OFF OF THE OIL FILL SPOUT. DYNO TESTING YIELDED AN INCREASE IN HORSEPOWER AND TORQUE!

USED INEX Red Box, Tested on the engine dyno

#1 SELLING JET KIT--OUR HSR JET KIT COMES WITH 2 DIFFERENT COMPLETE SETS OF (4) MAIN JETS FOR WEATHER IN YOUR REGION, SET OF... 4 PILOT JETS, 4 AIR JETS, 4 TITANIUM NEEDLES, 4 DYNA SLIDE SPRINGS, 16 STAINLESS CARB TOP ALLEN BOLTS,  QUICK AND EASY TO SELF INSTALL, COMPLETE PACKAGED KIT ALSO COMES WITH A JETTING CHART AND INSTRUCTIONS.